Jumat, 23 Desember 2016

HOW TO UNLOCK XIAOMI REDMI NOTE 3 PATTERN LOCK

How to Unlock Xiaomi REDMI NOTE 3 Pattern Lock / How to unbrick xiaomi redmi note 3





Related image



Method : 1
This Recovery method only works if bootloader of your mobile i unlocked other wise you need to try second method
  1. Fully charge the battery.
  2. Turn ON the device by pressing and holding the VOLUME UP key and the power key together.
  3. Press Power until Mi LOGO shows up, but keep pressing the Volume UP until a menu shows some chinese text and the word ENGLISH.
  4. Use Volume down to select English and press power to confirm.
  5. In the next menu select WIPE & RESET.
  6. Confirm with power or Cancel using BACK key.
  7. After hard reset is done, reboot system if it does not do it automatically.
Note! All data will be deleted! Be sure to backup your user data before doing a hard reset.

Method : 2


This method will help you to unbrick your redmi note 3
1.Download ADB Files and extract it into your computer.
2.Download Mi Flash Tool and install it.
3.Download MIUI 7.x Fastboot ROM.
4.Download drivers for your mobile(Xiaomi MI Note Pro)
5.Your phone should be in Download mode.
6.For this Connect your mobile to your system,then on your computer enter into the folder where ADB  files are extracted.

7.Then by pressing Shift + Rightclick of your mouse you will enter into this window.



8. Then click on Open command window here and you will get CMD prompt.

9.Then you need to type two commands in CMD prompt

     

     adb devices
     adb reboot edl



10.Then you will enter into download mode.

11. Then you need to check whether your mobile connected properly to your system for this goto Device manager through windows search.


  






12. Then update driver software of Qualcomm drivers by above picture process and update software automatically or manually by 

Path : Programfiles\Xiaomi\Miphone\Qualcomm\Driver

  Then you will get ports for connected devices 




13.Then extract the downloaded MIUI ROM.
14. Then launch MI flash tool and select browse button in the tool and select extracted folder.



15.Now click on Refresh then you will get your connected mobile as COM port then click on Flash all at botoom line of flashtool,Then click on Flash button.




16. Wait till the green colur line passed and get a command operation is successfully completed.Now disconnect your mobile turn it on it will takes some time to reboot.

Some times you gets an error for this you need to download a file and replace it in the extracted rom and boot as like above process,Link for file is given below

Links : 
Link 1 : Adb Files


















SHARE THIS

Author:

Etiam at libero iaculis, mollis justo non, blandit augue. Vestibulum sit amet sodales est, a lacinia ex. Suspendisse vel enim sagittis, volutpat sem eget, condimentum sem.

0 comments: